词语吧>英语词典>deflexion翻译和用法

deflexion

n.  偏斜,偏转

英英释义

noun

双语例句

  • Based on the strength calculation of main girder on two transporter cranes using finite element method and field measurement of the working stress, this paper analyses the causes for the cantilevered end deflexion of the main girder and presents the repair procedure as well as the after-repair status.
    通过用有限元法对装卸桥主梁进行强度计算及对其工作应力进行现场测试,分析了悬臂端下挠的原因,介绍了修复的方法和效果。
  • The anisotropy associated with the earth's rotation results in a slight deflexion of the ray paths. Analysis of the Cutoff Frequency of Ridged Waveguides Partially Filled with Dielectric by Non-uniform FDTD
    与地转有关的不均匀性会导致波向线产生轻微的偏转。用非均匀网格FDTD法计算部分介质填充脊波导的截止频率
  • The principle of acoustooptic diffraction was introduced, and the experimental research was carried through about acoustooptic deflexion and modulation of Bragg diffraction.
    介绍了声光衍射的原理,并对布拉格衍射中的声光偏转和声光调制进行了实验研究。
  • The result shows that the law of acoustic-optic deflexion and modulation basically tallies with the experiment. The probe was equipped with a radio occultation experiment to profile atmospheric density.
    通过实验测量,绘制了声光偏转和调制曲线,并结合理论对实验结果作了分析讨论。探测器上配备有一个用于测定(绘)大气密度轮廓的无线电掩星实验装置。
  • We gather a set of economically feasible technical criteria on linearity 、 squareness 、 deflexion 、 pitch and oscillation of sliding guide etc, and make the survey accuracy of the machine tool hit 63.2 μ m, and meet accuracy requirement.
    在各导轨的直线度、垂直度、导轨运动时的偏转、俯仰、摆动等方面得出了一组经济可行的技术指标,使机床的测量误差小于63.2μm,满足了精度要求。
  • Application of the Finite Difference to the Calculation of the Deflexion of the Steel Column of the Contact-line
    有限差分法在接触网钢柱挠度计算中的应用
  • On the base of the model of residual stress, the stress state between matrix and crystal was analyzed. With the introduction to the theory of crack deflexion, the effect of different aspect ratios of crystals on toughen was discussed.
    以残余应力模型分析基体和颗粒间的应力状态,应用裂纹偏转理论,讨论不同长径比晶粒的增韧效果。
  • It is suggested that fibre pulling out and interbedded crack deflexion are the major toughing mechanism in the asymmetrical FGM.
    HA(ZrO2)-316L不锈钢纤维FGM中,分析认为,增韧机理主要为纤维拔出增韧和层间裂纹偏转增韧。
  • For example, how to match the CVT with dynamic system? How much key structure factors are there in CVT and how to define them? The belt will deflect while CVT is working. How to increase the life of the belt according to deflexion?
    例如:CVT系统与动力系统如何匹配?CVT系统的关键结构参数有那些,如何确定?CVT系统工作过程中皮带产生偏斜,如何控制偏斜以增加皮带的使用寿命等。
  • The stress expression of the whisker tip was got on the basis of modifying the shear lag theory. The expression to forecast the corporate toughening effect of whisker bridging, whisker evulsion and crackle deflexion was derived.
    对剪滞理论进行了修正,得出了晶须端部所受应力的表达式,推导出了预报晶须桥联、晶须拔出、裂纹偏转三者协同增韧效果的表达式。