deforms

英 [dɪˈfɔːmz]

美 [dɪˈfɔːrmz]

v.  改变…的外形; 损毁…的形状; 使成畸形
deform的第三人称单数

柯林斯词典

• V-ERG （使）变形;（使）成畸形;损毁…的外形
  If somethingdeformsa person's body or something else, it causes it to have an unnatural shape. In technical English, you can also say that the second thingdeforms.
  1. Bad rheumatoid arthritis deforms limbs...
     严重的类风湿性关节炎会造成四肢变形。
  2. ...the ability of a metal to deform to a new shape without cracking.
     金属重新塑形而不断裂的能力

双语例句

• By minimizing this error function, the wavelet feature template deforms according to target deformation during tracking.
  利用“贪心算法”修正小波的位置参数，使这个能量函数最小化，从而实现可变形模板跟踪。
• According to the above structure, when the plunger punches the waste material, the waste material will be extruded through the second end of the blade hole and then deforms.
  在上述结构下，即冲头在冲孔处切废料时，废料会从该刀口的第二端挤压而过，从而使废料变形；
• In thermal recovery wells, casing is heated by the injection steam and thermal stresses are produced in the casing. Casing deforms when the thermal stresses exceed the yield point of the steel.
  在热力采油井中，注入蒸汽加热油层套管，油层套管受热产生压应力，当压应力达到套管钢材的屈服极限后，套管开始变形。
• A collapsed fuel tank may have to be replaced, depending on how the tank deforms.
  应根据油箱的变形程度，更换被压坏的燃油箱。
• Subsequently dislocations are nucleated at the grain boundaries, and slide across the interior of grain, which causes the interior of grains to yield, where the sample deforms dominantly by dislocation movement.
  随后位错自晶界处发射、运动穿过晶粒内部，晶粒内部屈服，塑性变形由位错运动主导。
• Insertion and twisting of the needles employed in acupuncture mechanically deforms the skin, leading to the release of ATP by skin keratinocytes ( 1).
  针灸针通过提插捻转机械刺激引起皮肤变形，导致皮肤角质细胞释放ATP（1）。
• Under the influence of the external loads, the body B moves and deforms.
  在外加负荷的影响下，物体B将运动和变形。
• In the cold upsetting production, when the head of the part deforms much, a big block would generally be used and the diameter reducing processing method adopted.
  在冷镦生产中，当零件的头部变形较大时，通常采用大料及缩径的加工方法。
• The specimen deforms under a tensile stress applied parallel to the fibres.
  试样在平行于纤维的张应力作用下发生变形。
• The dynamic temperature fields of solidification process result in the uneven shrink of every part of castings and cause the thermal bending moment to act on the castings, finally the casting rod yields and deforms.
  铸造过程中的动态温度场导致铸件各部位的不均匀收缩，引起了作用于铸件截面的热弯矩，致使杆状铸件挠曲变形；