indentations

英 [ˌɪndɛnˈteɪʃənz]

美 [ɪnˌdɛnˈteɪʃənz]

n.  缺口; 凹陷; 凹痕; 行首缩进; 行首空格; 造成凹陷(或缺口); 将行首缩进
indentation的复数

柯林斯词典

• 行首缩格,行首留空格
  Anindentationis the space at the beginning of a line of writing when it starts further away from the edge of the paper than all the other lines.
• N-COUNT 凹口;缺口
  Anindentationis a shallow hole or cut in the surface or edge of something.
  1. Using a knife, make slight indentations around the edges of the pastry.
     用刀子绕馅饼边沿刻小锯齿。

双语例句

• Using a knife, make slight indentations around the edges of the pastry.
  用刀子绕馅饼边沿刻小锯齿。
• Xtrace: iprint= awt activates method trace and set the output to stderr with indentations.
  iprint=mt激活方法跟踪并将输出发送到stderr，进行缩进。
• If you opt for the northerly shore route from the entry area you'll find many caves and indentations as you explore the underwater terrain.
  你沿条线路潜游，即从入口潜向北岸，在观察水下地形时，你将看到许多大的空隙及缺口（海岸线凹入处）。
• These products may have indentations, ribs, grooves or other deformations produced during the rolling process ( reinforcing bars and rods).
  这类产品可带有在轧制过程中产生的凹痕、凸缘、槽沟或其他变形（钢筋）。
• The results show that after the treatment, indentations and cracks appear in the surface of the silk fibers and fibrillar structure of the silk fibers becomes distinct.
  研究发现真丝纤维经低温氧等离子体处理后，表面形成微小凹坑和裂纹，纤维内部原纤构造明显。
• Make four indentations into the condenser near the standard cone joint.
  在冷凝器接近标准圆锥接头处打四个穴孔。
• The link of steel sheeting with concrete in a composite deck slab relies on vertical wave troughs and indentations.
  对配置横向剪力钢筋的压型钢板-轻骨料混凝土组合楼板的抗滑移性能进行了研究。
• Not even the long rows of windows and stores, the indentations of the chimneys, and the roofs, and the vague reflections, which are cast back by the wet and muddy pavements, were visible.
  甚至连一排排一层层的窗户、犬牙交错的烟囱和屋顶、泥泞路面的微弱反光也都看不见。
• A new experimental measurement of residual stresses around Vickers ′ indentations on the surface of the SiC/ Al 2O 3 nanocomposites is proposed with the aid of a Raman microprobe.
  提出了用拉曼显微镜测试SiC/Al2O3纳米复合材料表层V氏压痕周围残余应力的新方法。
• The varying distance between the microhardness indentations at the blanks of the cracks as a function of applied loads could be monitored to determine the crack opening displacements near the crack tip, which were used to obtain the crack opening load.
  通过测量裂尖后两岸显微硬度压痕随裂纹张开闭合的距离变化，建立了缺口根部角裂纹裂尖附近的裂纹张开位移和载荷的关系，以此确定裂纹的张开应力。