short-circuiting

英 [ˌʃɔːt ˈsɜːkɪtɪŋ]

美 [ˌʃɔːrt ˈsɜːrkɪtɪŋ]

v.  (使)短路; (做事)抄近路，走捷径
short-circuit的现在分词

柯林斯词典

• V-ERG (使)短路
  If an electrical deviceshort-circuitsor if someone or somethingshort-circuitsit, a wrong connection or damaged wire causes electricity to travel along the wrong route and damage the device.
  1. Carbon dust and oil build up in large motors and cause them to short-circuit...
     碳尘和燃油在大发动机里越积越多，造成了发动机短路。
  2. Once inside they short-circuited the electronic security.
     一旦置入，它们就会使电子安全设施短路。
  3. Short-circuitis also a noun.
     
  4. The fire was started by an electrical short-circuit.
     火灾是由电线短路引发的。
• VERB 回避，绕过（某一流程或程序)
  If someone or somethingshort-circuitsa process or system, they avoid long or difficult parts of it and use a quicker, more direct method to achieve their aim.
  1. The approach was intended to short-circuit normal complaints procedures.
     这种方法旨在避开正常的投诉程序。

双语例句

• According to the analysis we can get the result of the welding quality from the current and voltage of the CO_2 gas shield droplet short-circuiting transfer.
  在此基础上，采用本系统对熔滴短路过渡CO2气体保护焊的焊接电流和电压波形进行了实时采集、存储。
• The control of CO 2 arc welding short-circuiting transfer with magnetic field is studied.
  研究了外加磁场对CO2焊短路过渡的控制。
• The short-circuiting transfer is a main form of CO2 arc welding droplet transfer. The arc welding short-circuiting transfer process and the current waveform control process of a developed new type waveform controller a simulated.
  对CO2弧焊短路过渡过程，以及研制的一种新型波控器的电流波形控制过程进行了计算机模拟仿真，仿真结果与实验吻合。
• Metal transfer frequency are usually taken as the criteria to evaluate the process stability of short-circuiting arc welding.
  短路过渡焊接时，熔滴过渡频率通常被作为评价焊接过程稳定性及焊接质量的重要指标。
• Short-circuiting Effect and the Solution in Gnutella Network
  Gnutella网络中的短路效应及其解决方案
• Adaptive control system with constant frequency of droplet transfer for waveform controlled short-circuiting co_2 arc welding
  波控短路过渡CO2焊接恒频自适应控制系统
• If your program logic depends on any of that additional code, you should probably avoid short-circuiting operators.
  如果程序逻辑依赖于任何这些附加代码，您可能应该避免使用短路运算符。
• In order to take into account the synthetic influence of all characteristic parameters, by means of the characteristic parameters synthetic value, a quantitative evaluation function is built up to describe and real time evaluate the short-circuiting transfer process of CO2 arc welding.
  为综合考虑这些参数的影响，以特征参数综合值来描述和实时评判CO2焊接短路过渡过程，得到一个能全面定量描述和评判CO2焊接过程的综合评价函数。
• Detection and Analysis on the arc energy of short-circuiting co_2 arc welding
  短路过渡CO2焊电弧能量的检测与分析
• The CO2 welding process needs the special external characteristic and dynamic characteristic of power source for there are alternately arcing time and short circuiting time at the period of short-circuiting CO2 welding.
  在采用短路过渡方式的CO2焊过程中，短路和燃弧过程交替发生，因此它对电源的外特性和动特性有特殊的要求。