shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- The research of early age shrinkages of concrete is very important for the solutions of early age cracking of concrete engineering, especially for high performance concrete.
研究早龄期收缩对于解决混凝土工程，尤其是高性能混凝土的早期开裂具有重要意义。 - The properties of SCLC, such as anti-carbonization, permeability resistance, are better than those of ordinary performance concrete, but its dry shrinkages value will be bigger than that of ordinary performance concrete in the natural surroundings.
SCLC的抗渗性能和抗碳化能力要优于普通混凝土，但其在自然条件下的干缩值要大于普通混凝土。 - The influences of initial temperatures and the sizes of clusters on the coalescence were revealed by calculating the shrinkages and aspect ratios and by tracking the snapshots of the system configures.
通过对并合体系的收缩因子、纵横比率计算，以及体系构型的跟踪记录，揭示了团簇的初始温度和团簇的尺寸对并合过程影响的一般规律。 - In physical and mechanical indexes, the basic density, air-dried density, compression strength parallel to grain, MOR, MOE and toughness of mature wood are higher than that of juvenile wood. The shrinkages of juvenile wood are higher than that of mature wood.
在物理力学性质指标中成熟材的基本密度、气干密度、顺纹抗压强度、抗弯强度、抗弯弹性模量及冲击韧性高于幼龄材；而幼龄材全缩率高于成熟材。 - The effects of carbonization temperature and time on shrinkages of PAN-CHF and PAN-ACHF, activation yield, specific surface area and adsorption capacity were investigated.
考察了炭化温度和炭化时间对PAN-CHF的收缩率、PAN-ACHF的收缩率、活化收率、比表面积和吸附性能的影响。 - On the one hand, casting shrinkages at different positions of the blade are considered as nonlinear thermo-mechanical casting deformations that are calculated with accuracy by finite element analysis.
一方面，基于叶片收缩变形位移场的有限元仿真结果，更为准确地计算铸件不同部位的收缩率； - Compared with the other shrinkages of hydraulic mass concrete, temperature shrinkage is the most prominent.
在水工大体积混凝土中，温度收缩是其主要的收缩。 - Abstract: introduced is the experience in replacing atmosperic riser with thermal-isolation riser and improving pouring system to eliminate shrinkages.
文摘：介绍了用保温冒口代替大气压力冒口，改进浇注系统解决铸件缩孔问题的经验。 - The full sintered Y-TZP had excellent mechanical properties, with bending strength of 710 MPa, fracture toughness of 4.77 MPa · m 1/ 2. During full sintering process, the shrinkages of dental crown in different spatial dimensions were equality and uniformity.
完全烧结的陶瓷材料机械性能优良，弯曲强度达到710MPa，断裂韧性达到4.77MPa·m1/2。在完全烧结过程中，各个方向收缩均匀一致。 - The relationship of relative humidity and autogenous shrinkages of reactive powder concrete ( with compressive strength of 200 MPa) with ages were investigated detailed.
通过试验研究了抗压强度为200MPa的活性粉末混凝土在水化过程中内部相对湿度及其自收缩随龄期的变化规律；