squish
英 [skwɪʃ]
美 [skwɪʃ]
v. (被)压坏,挤坏; 发吧唧声; 发吱嘎声
过去分词:squished 过去式:squished 现在分词:squishing 第三人称单数:squishes
BNC.48495 / COCA.19433
牛津词典
verb
- (被)压坏,挤坏
if sth soft squishes or is squished , it is crushed out of shape when it is pressed - 发吧唧声;发吱嘎声
to make a soft wet sucking sound
英英释义
noun
- the noise of soft mud being walked on
verb
- put (a liquid) into a container or another place by means of a squirting action
- walk through mud or mire
- We had to splosh across the wet meadow
双语例句
- The reflected spray distributes at squish zone and concave zone of combustion chamber, big swirl of spray is obtained and expand to more domains.
反射后的油束分布在燃烧室的挤流区和凹坑区,形成大的油束涡流,并向较大范围扩展。 - Experimental Research on a Squish Jet Combustion Chamber
CA1102汽油机挤气射流燃烧室研究 - Crunch, squish. What a great sound! What a ( loud) noise!
压碎声,咯吱咯吱的声音,多么美妙的声音啊! - Gas Skunk: This is not good. It's gonna fall and squish us.
这不好。它就要倒下并压扁我们了。 - It shows that the squish flow velocity decreases and the reverse flow velocity increases as cylinder heat transfer and cylinder gas leakage increase.
本文还导出了考虑散热和活塞环漏气影响的轴向挤流速度和逆喷速度的解析关系式,该式表明散热和活塞环漏气使轴向挤流速度减小,逆喷速度增加。 - During the compression stroke the turbulence kinetic energy decreases due to the dissipation effect, while the turbulence kinetic energy in the center of the cylinder increases as a result of the squish effect.
缸内平均湍动能强度在进气冲程中总体呈先增大后减小的趋势,压缩冲程中耗散作用使湍动能降低,但挤流作用使气缸中部的湍动能升高; - A complete electric resistance furnace with all-fibred, double top of furnace, high emissive coating, protective enhancement coating, directive emission-enhancement heating elements, automatic furnace door squish mechanism and movable shroud was obtained, and its structural characteristic and energy saving theory was discussed.
介绍了采用全纤维、双炉台、高发射率涂料、保护增强涂料、定向增强辐射加热元件、自动炉门压紧机构、移动罩式等技术制造的节能电阻炉的结构特点和节能原理。 - The air motion in UCS combustion system is much stronger than that in base combustion system and the strong reversed squish lasts longer in the former than in the latter because the former has a far larger squish area than the latter.
伞帘喷雾燃烧系统的挤气面积远大于原机,因此前者的空气运动明显强于后者,较强逆挤流维持的时间长于后者。 - Study on Combustion Chamber Squish Velocity and Heat Release in a Moped 2-stroke Engine
二冲程汽油机燃烧室挤流和放热规律的研究 - Reversed squish is mainly concentrated at edge of combustion chamber bowl.
反喷或逆挤流主要集中在燃烧室边缘上。
