tensile

英 [ˈtensaɪl]

美 [ˈtensl]

adj.  张力的; 拉力的; 抗张的; 可拉长的; 能伸长的; 可延展的

CET6TOEFLGREIELTSTEM8机械

BNC.24180 / COCA.24946

牛津词典

adj.

• 张力的；拉力的；抗张的
  used to describe the extent to which sth can stretch without breaking
  1. the tensile strength of rope
     绳索的抗拉强度
• 可拉长的；能伸长的；可延展的
  that can be drawn out or stretched
  1. tensile cable
     可伸延的电缆

柯林斯词典

• ADJ 可伸展的;可拉长的
  You usetensilewhen you are talking about the amount of stress that materials such as wire, rope, and concrete can take without breaking; a technical term in engineering.
  1. Certain materials can be manufactured with a high tensile strength.
     有些材料可以制造成抗拉强度大的产品。

英英释义

adj

• capable of being shaped or bent or drawn out
  1. ductile copper
  2. malleable metals such as gold
  3. they soaked the leather to made it pliable
  4. pliant molten glass
  5. made of highly tensile steel alloy
  Synonym:ductilemalleablepliableplianttractile
• of or relating to tension
  1. tensile stress
  2. tensile pull

双语例句

• Early concrete cracks because concrete's shrinkage deformation and concrete elastic modulus and tensile strength does not adapt produces.
  混凝土早期裂缝产生是因为混凝土的收缩变形与混凝土弹性模量和抗拉强度不相适应产生的。
• Have good tensile strength and elongation hardness HB-160.
  有良好的抗拉强度和延伸率硬度HB-160。
• This wool possesses high resilience and tensile strength.
  这种毛弹性大，拉力强。
• Tensile strength and stiffness increase as skin thickness ratio increases.
  拉伸强度和硬度随外壳厚度比增加而增加。
• It was found that the adhesive tensile and shear strength of the modified epoxy resin was increased.
  实验表明：预聚体的加入明显提高了环氧树脂的粘接剪切强度和拉伸强度。
• The anisotropy coefficients of the uniaxial compressive strength and tensile strength of numerical simulation results are0.72 and0.24, respectively.
  数值模拟结果得出单轴抗压强度和抗拉强度的各向异性系数分别为0.72和0.24；
• Its thermal deformation behavior, hardness and tensile strength were determined.
  对其耐热形变性能以及硬度和拉伸强度进行了研究。
• Adding GF increased not only tensile strength and bending modulus but also impact strength of the composite.
  GF的加入不但提高了材料拉伸强度、弯曲性能，而且提高了其冲击强度；
• The tensile strength and the elongation percentage of the parent metal and the weld zone increased slightly.
  冲击处理使焊缝区和母材区的强度和伸长率均有所增加。
• Tensile strength was tested, and the joint fractures and microstructures were analyzed.
  测试接头拉伸强度，并对断口和接头显微组织进行分析。